Find your clinker quantity in a few clicks

Calculating the required clinker

The Hagemeister quantity calculator makes it easier for you to determine the clinker requirements for a construction project in a clear and concise form, taking into account all basic details.

The striking graphics explain every single step and the checklist-like structure guides you point by point through the calculation phases. This will lead you to a definite amount of clinker and the resulting number of pallets (rounded up to full pallets to compensate for breakage and crushing).

The usual defined clinker formats (NF/DF/ 2DF/ WF/ ModF 290...) and a horizontal joint width of 12.5 mm and a head joint width of 10 mm are assumed in order to define the requirement per m². The usual Hagemeister pallet load figures are also used as a basis as well as the common masonary patterns.

1. Choose clinker format:
2. Enter surfaces:
Gable End 1
Gable surface area:W  mxGH  m= m²
Gable triangle:W  mxGH  m: 2 = m²
./. Sum of all openings Gable End 1 (windows/doors WxH) m²
continue
Eaves Side 2
Eaves side area:L  mxH  m= m²
./. Sum of all openings Eaves Side 2 (windows/doors WxH) m²
continue
Gable End 3
Gable surface area:W  mxGH  m= m²
Gable triangle:W  mxGH  m: 2 = m²
./. Sum of all openings Gable End 3 (windows/doors WxH) m²
continue
Eaves Side 4
Eaves side area:L  mxH  m= m²
./. Sum of all openings Eaves Side 4 (windows/doors WxH) m²
continue
Calculate total area
total area: m2
continue
3. Please bindingly confirm:


 
4. Please note and fill in if necessary:

Calculate clinker requirements & number of pallets
5. Result:
Clinker requirement
(only surfaces)		-> units
(Ausgangsgröße sind die üblichen DIN-Klinkerformate und eine Lagerfugenbreite von 12,5 mm sowie eine Kopffugenbreite von 10 mm, um den Bedarf von pro m² bei einem Norm- und zulassungsgerechten Mauerwerk mit einem zu definieren.)
+ 5% Surcharge ( Stück)
(Cuttings/breakages/shed in accordance with VOB/customary construction)
 
Clinker requirement
(in total)		-> units
Number of pallets-> units
(based on the usual Hagemeister pallet stocking of pieces for (normal perforation) and rounded up to whole pallets)
Additional full clinker brick as a finish for window sills-> units

Print all entries and the result
page top Mein Merkzettel